SUP
WINDSURFING
INFLATABLE

WHOPPER    10’0″x33″x6″

iGO    10’8″x33″x6″

TOURING    12’6″x30″x6″

ONE TOY FOR ALL THE FAMILY

Compact, light and strong, you can go paddleboarding, learn windsurfing and even get planing with its footstraps and water-releasing Rail Edge technology. It’s great for teaching your kids to windsurf and best of all, it rolls up into a bag and packs into the trunk of your car.

WHOPPER 10’0”x33”

Length: 10’0” /305 cm
Width: 33” / 84 cm
Thickness: 6” / 15 cm

The allrounder. Suitable for cruising, learning and even a bit of surfing. This board delivers performance with ease. It is the most stable shape in the range. The width makes it ideal for beginners and heavier riders to get used to windsurfing and paddling without getting wet.


Available in Zen technology.

iGO 10’8”x33”

Length: 10’8” /325 cm
Width: 33” / 84 cm
Thickness: 6” / 15 cm

Longer and slightly narrower to improve glide. This is the board we recommend if you are about to get your first SUP board and you are under 105 kg.


Available in Zen technology.

Touring 12’6”x30”

Length: 12’6” /381 cm
Width: 30” / 76 cm
Thickness: 6” / 15 cm

The fastest model. It’s narrower with a parallel outline for the best glide and precision.


Available in Zen technology.

CHOOSE YOUR SET UP
SUP MODE
Add accessories
WINDSURFING MODE

Key features

WHAT’S NEW

– All new iGo model –

– New Whopper outline –

– New Touring outline –

– New welding technology for strength and durability –

– Yulex Footstraps. The world’s first footstraps made with natural rubber –

HEATED AND BONDED FOR LIFE

MECHANICAL BOND = STRENGHT + DURABILITY

Glue is never forever.
Starboard’s new welding technique turns two into one – using heat to bond two separate pieces of PVC into a single solid unit. Heat-welded PVC creates a mechanical bond that’s stronger, lasts longer – and is better for the environment.

REMOVABLE CENTER FIN

All models have a removable center fin box. Remove the box for an improved paddling experience without the added weight or drag. Attach the box and supplied Drake Shallow center fin to prevent the board from drifting sideways when windsurfing.

FULL POWER PLANING

Our SUP Windsurfing Inflatables feature our 3D Rail Edge technology, a proprietary 3D elastomer compound that follows the contours of the board and creates a release edge that allows the boards to fully plane yet fold and roll up. Thanks to this 3D Rail Edge, you can accelerate and enjoy the most exciting planing sensation possible on an inflatable board.

 

MUSHROOM MAST TRACK INSERT & LOAD SPREADER

All SUP Windsurfing boards use the Starboard ‘mushroom’ style mast track insert. We insert it from underneath the board to make it extra safe and strong. The more the sail tries to pull the insert out, the more it stays in place.

A deck plate distributes the top load over a large area for added stiffness.

FOOTSTRAP SYSTEM

Starboard’s exclusive footstrap insert system uses 7mm thin insert plates that are glued to the board’s surface. The footstraps bolt into the embedded brass plate and two male pins connect through the footstrap for a twist-free fitting.

D-RINGS

They also feature two D-rings: one in the nose that acts as a towing eye for easy transport and one in the tail that acts as a leash plug. Paddle boarding without a leash is dangerous and not recommended.

Leashes save lives, wear one.

AIR VALVE

All SUP Windsurfing Inflatable boards feature an air valve and a neoprene carry handle that doubles as paddle holder.

V8 DOUBLE ACTION PUMP

All boards are supplied with our benchmark V8 Double Action pump. Inflate your board faster and easier with continuous pumping cycles in both down and upward action. Turn the switch and it becomes a single action pump for easy inflation to 18 PSI. Always inflate between 15 and 18 PSI for maximum stiffness and performance.

ROLLER-WHEELED BAG

All of our SUP WINDSURFING Inflatables are supplied with our new roller-wheeled bag that packs everything away tidily and conveniently.
Made of a RPET 450D outer fabric layer made from recycled plastic bottles, in partnership with Waste2Wear. The bottles are chopped into flakes, washed, melted and extruded into yarns and then spun into a fabric. Between 30 to 50 bottles are used per bag. Bottles that now re-enters the market again, without risk of polluting the environment. Ripstop weaving technology improves wear and tear resistance.

SUP WINDSURFING SAILS

The Starboard SUP Windsurfing sails are a great addition to any SUP Windsurfing or SUP board fitted with a sail connection. It is light, powerful and designed specifically for inflatable windsurfing and paddle boards. An excellent choice for entry level windsurfers because of its versatility and durability.

SPECIFICATIONS

ModelWhopper 10'0"x33"x6"IGO 10'8"x33"x6"Touring 12'6"x30"x6"
Length305 cm325 cm381 cm
Width84 cm84 cm76 cm
Thickness6"6"6"
Volume322329351
Sail Range2.5 - 7.5 m22.5 - 7.5 m24.5 - 7.5 m2
TechnologyZenZenZen
Weight11.7 kg11.9 kg11.3 kg