Starboard Forums

Starboard Forums (
-   Ask Our Team (
-   -   iSonic length question (

jeroenmarcia 11th September 2006 07:44 PM

iSonic length question

I have a question about the iSonics. Why are they getting longer when the volume is decreasing ? iS87 is 243 cm, iS133 is 222 cm. Is there a reason for this ?



Ian Fox 12th September 2006 06:02 AM

RE: iSonic length question
Hi Jeroen,

Look the other way !

No, seriously ... As the volume increases, they get wider, which increases the available planing area/surface area at the back end of the board - which in turn allows a shorter, lighter, more responsive and faster "short front" board length to be configured. (iS133)

The short wide outline delivers the highest efficency (aspect ratio) planing surface, but there is compromise towards control at higher speeds, rougher conditions.

Alternately, at high speed, we need a increased amount of compromise towards control in the ideal "optimum mix" of theoretical efficency vs real world speed, which narrows the board (planing surface) - and forces the planing area narrower but longer to still retain the required surface are for that board configuration. (iS87)

Cheers ~ Ian

All times are GMT +7. The time now is 01:29 AM.

Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.