Go Back   Starboard Forums > Ask Our Team

Thread Tools Display Modes
Old 5th September 2006, 06:03 PM   #1
New Member
Join Date: Sep 2006
Posts: 4
Default trimm questions for sonic 85 & isonic 115


I own an isonic 115 (used sails: rs6 8,4 & 7,2) and a sonic 85 (used sail: rs6 6,2). To increase their performance I have some questions...

Could you please tell me -for my weight (75kg) and height (1.74m)- where I should place:
*my mastfoot
*my footstraps
for the different sails on the boards

Also could you indicate what fins (brand/type/size) I should use as an upgrade for the standard ones?

Many thanks in advance!
didier01 is offline   Reply With Quote
Old 6th September 2006, 07:34 AM   #2
Jesper Orth
Join Date: Aug 2006
Posts: 44
Default RE: trimm questions for sonic 85 & isonic 115

Hi Dider

Good choice of boards for your sail range. I used the same set up of boards, and sometimes the Isonic 125 for lighter wind.

For the Isonic 115 I would place the foot straps all the way back for all of them. Mast track position I aim for the middle and then slide it 1-2 cm back. I use the same setting for all sails for the 115

For the Isonic 85 I would place the foot straps in the outside holes all the way back as well. If you sail really choppy conditions, then take the front holes. I use the same setting for all sails on the 85

The fins supplied is good all-round. But upgrading can change the performance in a positive direction.

For the 115 I use the Vector Fins Maui G-10 Canfire in 38cm
For the 85 I use Vector Fins Maui G-10 Rockit 32 cm. This fin I use in all conditions for all sizes.


Jesper Orth

Jesper Orth is offline   Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +7. The time now is 07:10 AM.