Old 21st November 2006, 09:29 AM   #1
Join Date: Sep 2006
Posts: 66
Default Minor Board Patch

I have some scratches on my Kombat. They do not appear to have gone through making a crack. One had me concerned at first look but when I sanded off the non-slip, it was clear it didn't go through.

I was told Krazy glue can be used to ensure a good seal. Any thoughts on this??

mike is offline   Reply With Quote
Old 21st November 2006, 08:02 PM   #2
Dream Team - School Guru
Join Date: Aug 2006
Posts: 2,202
Default RE: Minor Board Patch

Hi Mike,
Krazy Glue (cyanoacrilate) will work, Satellite Systems "Hot Stuff" (not a cyanoacrilate, but similar) is a lttle better and dry as fast if not faster and is probably more permanent.
West Systems Epoxy, 5 minute Epoxy, 2 Ton epoxy, and products like Marine Tex all will work, but take a little longer to dry.
I've used JB Weld "Quick" very successfully.
Try to find osme matching paint and do your repair, then repaint the damaged area and your board will maintain it's water tightness and look good as well. If you don't paint it, you will get some pretty ugly UV yellowing with the clear products above, and for the Marine Tex (normally white or grey) and the JB Weld Quick (normally black) you will need to paint to maintian the cosmetics of your board.
Hope this helps,
Roger is offline   Reply With Quote



Thread Tools
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT +7. The time now is 04:20 PM.